http://chevyhiperformance.com/techar...mage_large.jpg

This is what I would like to see! (pitman arm removed from steering box spline) Apparently there is a "special" tool you can get for this. More $$.

The other end of the pitman arm joins at the tracking bar joint ( see grease nipple) is the other half of my problem, as I have to install the new pitman arm, that came with the new steering box. As I mentioned the spline is apparently different. If I could just get the tracking bar joint undone from the pitman, I could save the hassle of removing the pitman from the steering box spline altogeather, but this is the only way that I can turn the pitman on the joint to the point that I could give it a good hammer blow, which supposedly will cause it to release, from the joint.