Hey guys new member looking for piston advice please

[Gamecock66]

I found these pistons new on ebay from Mad Dog Racing and wanted to see what opinions you guys have or experience with them. If it helps my car is a 1971 Corvette convertible, 4spd, 3:70 gears and here is my combo so far.
454 + .03o
SCAT 9000 Crank
3/8 rods
GMPP or Edelbrock aluminum 100 cc heads
CC eXtreme solid cam.
Edel Performer RPM AIR GAP
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2437083419

Thanks in advance for any help and\or advice.

BlackRat

[76GMC1500]

If you've got money to burn and want the best of the best, Wiseco is the way to go. They'll run you a little over $600 for a forged set. www.wiseco.com

[Gamecock66]

Thanks I agree. But unfortunately I am on a budget and that would blow it up. MY goal is 500hp and an rpm range of 6k. I'm thinking that since I am going to be using the 3/8 rods and the SCAT9000 crank which is still a cast crank the wiesco's might be a little over kill.

BlackRat