Hey Denny,

Thank's for getting back to me
I do have 2lb residual valves front and rear, and I did adjust the rod between the master and the booster. I also realized that the guy that was helping me put the rear calipers on upside down so I made it right and then bled the lines again and still no pressure. I took both lines off the master and put bolts in the holes to see if there is any pressure and now you can't even move the pedal there's so much pressure.
I'm truely lost on this one. I've been building and messing around with cars for close to 30 years and this is the first time that I have no idea what the hell is going on.