Results 1 to 15 of 46
LinkBack URL
About LinkBacksHybrid View
-
07-07-2006 12:08 AM #1
CHR Member
- Join Date
- Jan 2006
- Location
- fort myers
- Car Year, Make, Model: '27 ford/'39 dodge/ '23 t
- Posts
- 11,033
I measured the thickness of the boss that mounts the spindles, and it is about 2 and 3/8 inches. The kingpin bore is .813.
They probably left the axle stock and just modified the spindles to make them fit, but you will want to check just in case they bored the hole in the axles oversized, or something.
Hope this helps, and sorry I forgot to get this for you sooner.
Don
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year