-
04-14-2006 06:38 PM #1
Chevy Posi Carrier Removal Problem
I am trying to pull the carrier out of a Chevy 8.5" rear end. I have the cover off, and I pulled the bolt out of the pin that goes through the spider gears. I have been trying to drift the spider gear pin out all day. I am driving it from the side of the carrier opposite the bolt. It won't budge. Am I missing something
?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-15-2006 02:35 PM #2
Did the end of the retaining bolt break off inside, I have had that happen. It's been a while but you should have a non threaded section on the bolt about 3/4's of an inch long. If not it may be broke off inside, and it ain't easy to get out of there. It's been so long I forgot how I got it out, but it's hardened so really hard to get a hold of.
-
04-15-2006 02:51 PM #3
Originally Posted by 73RS
Thanks. I looked and I have the entire retaining pin out. In fact the spider gear axle will rotate freely and I can move it by hand in and out by 1/16" but it comes up against some hard stop that I can't push it through...
-
04-15-2006 03:06 PM #4
are the axles pulled out of the carrier?????? if they are and the 4 bolts that hold the carrier caps are out it should fall right out on its owncheck out www.wisconsinstreetdominators.com home of wisconsin's fastest "street" cars
-
04-15-2006 04:19 PM #5
Originally Posted by cevan
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
The Australians have finally discovered the origin of the word 'Vegan.' Apparently it's an old Aboriginal word for 'Bad Hunter.'
the Official CHR joke page duel