Gibble... My ceilings are 10 ft. high... I wanted to go 12 ft. but it just was not in my budget to do so...

Bob... Of course I can't memorize all of your posts, but I do have them hard copied and filed away for safe keeping!! The earlier postings were good, but the new info you posted on this thread was exactly what I was looking for... To answer your questions... My slab is only about 30 days old and the reason I was thinking I would do it now was mainly based on the idea that it would be cleaner now and I knew the temperature would play a factor... As it stands now the construction should be done around late December or Early January... I will need to move into it immediately and of course everything I own leaks oil... Given those factors I thought It would be a good idea to do it as soon as possible before moving in...

After reading your post it looks like I will need to wait a while longer and by then winter will have set in... I will be sure to check for moisture as you indicated when I get ready to move forward...

I plan on having central heat and air in the shop, I wonder if I turn up the thermostat it will keep the floor warm enough to allow the epoxy to cure during the winter?...

Anything else I should be aware of?...

Thanks for the input...

Dave Brisco