Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: My first header build
          
   
   

Results 1 to 10 of 10

Threaded View

  1. 01-02-2006 06:42 PM #8
    pat mccarthy's Avatar
    pat mccarthy
    pat mccarthy is offline CHR Member/Contributor
    Visit my Photo Gallery
    Join Date
    Apr 2005
    Location
    bay city
    Posts
    10,546

    i do alot of 4 ich collector stuff on drag cars and some times there is no room so i run them very close to the floor 3/4 when i do it this way on headers or ex i sometimes make small set up blocks a jack it up to the floor so then i can tack it all up and get them up hi as they will go ,this just is the way that works for me here .is what i talking about working the tubes this is 2 1/4 and a tall deck block and a 3./4 hi ex port
    Last edited by pat mccarthy; 05-23-2006 at 04:44 PM.
    Reply With Quote Reply With Quote

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules

Links monetized by VigLink