C9x - great pics. That helped out. I'm going to get a digital camera and take a pic of my gas pedal linkage, as that is whre my concern is. Based on your pics, I'm pretty sure I can use the Lokar universal bracket the attaches to the back passenger screw of the carb. With the universal linkage - I'm pretty clear on how that will attach to the carb, but where the cable attaches to the pedal, it just comes through a tube that penetrates the floor board. Then there is some round ball on the end. On the Lokar universal linkage, it's got a fitting that looks like it's very specific to attach to Lokar's line of Universal Gas Pedals.

Pic at lower right hand side in this link shows pic of specific fitting that is on end of cable:

http://www.customrodderweb.com/tech/0503sc_pedal/

Thanks

Dave