I'm going to be running some wiring around on the rod, and was wondering if people could offer up suggestions and photos of what they recommend.

I'll be routing some wiring underneath and along the frame area around the engine area. Mainly lights, etc - but would be interested in possibly wiring a hydralic brake switch also. Have installed a under the floor master cylinder and quite can't figure out how to get that little micro-switch wired in to the new pedal mechanism. Up top it's that long flat piece of steel that the pedal is attached to, and it seems like it has quite a bit more travel on it than the old pedal that was attached the firewall mount system.

Open to suggestions and photos if anyone did anything creative there, also.

On the wiring, was thinking about some protective cover over the small wire bundle that would be routing areound under the car and on the frame. Again, looking for suggestions and photos, if you're willing to share.

THanks om advance,

Dave