Originally posted by Don Shillady
The bracket C9 made is really neat cables before they go into the brake bracket.

Don Shillady
Retired Scientist/Teen Rodder

That bracket is a Gennie Shifter bracket and came with the E-brake cables I believe.

Gennie Shifter is a pretty good outfit to deal with and I'm sure they'd sell you one separate.

If you made your own bracket, all it would take is four holes drilled in a piece of 1/8" angle - aluminum or steel.

The Gennie Shifter cables fit through the drill holes in the bracket and are retained by a keeper that has a couple of holes drilled for the inside cable.
A couple of allen setscrews hold the E-brake cables in place.

It helps to lay some solder onto the cable where you cut it for proper length.

Take a look here:
http://www.hotrodhotline.com/gennie/#brake

(I don't see a bracket similar to the one on my car, but I would guess it was simply left out of the picture.)