I have a 1982 Z28 pace car. As I said, I swapped the burnt CFI 305 for the 4bbl 350 I built. Didn't want to use all the electric stuff, just what I needed to. Got it all set in there nice and tight, planning on using the electric fuel pump in the tank...I need to re-route the fuel lines, but after that is there anything else or should I be good. I mean, will I need to run a power wire from the pump to the ignition or is that already hooked up internally? I have no idea. Other than that I just have to hook up the exhuast and the radiator and it should be ready. I really appreciate any help you can give on this matter. I do have a mechanical pump, but would still have to run new lines, thought it would be easier to just use what is already there. Thanks guys.