I have a 63 Nova with a sb350 in it and am having some issues with where the previous owner put the alternator.
It's located on the upper left (see picture below) but there is no room to tighten it as it hits the inner-wheel well. the belts feel relatively 'tight' but still squeal when the engine is revved up. I'd like to either find a bracket system that will allow for it to be tightned in this location, or move it to a spot where it can be.
FYI- I think it's got what they call a 'long' water pump. it's mounted out about and inch away from the block.

any suggestion??