Results 1 to 15 of 21
Threaded View
-
08-14-2005 05:13 AM #20
I've got a tri 4 link in the back.
I figured maybe the inside should stay where it is so that when it goes up on edge and tilts it wouldn't rub, I thought maybe I could sneak a little more in on the outside though, because that side will tilt the other way.
Here's a shot from a reasonable perspective to get a look at it.
I kind of wanted the look where the tires were as close to the fender as possible without hitting. It seems like I could get more in there, but maybe tires don't even come in increments small enough to fine tune it like that.
These are 215/70 R15





LinkBack URL
About LinkBacks
Reply With Quote
This site is up more often lately, but very little traffic.
Dead!