Results 1 to 15 of 21
LinkBack URL
About LinkBacksThreaded View
-
08-09-2005 05:39 AM #10
CHR Member
- Join Date
- Oct 2004
- Location
- parkesburg
- Car Year, Make, Model: 1950 chevy pickup
- Posts
- 580
I measured the pattern on the rear that I took from a 71 mustang last night.
The most accurately I could measure it seemed to be 4 5/8".
Now I'm looking at the chart posted previously and see there
is no 5 on 4 5/8".
Would anyone know what it was on a 71 mustang?
Oh yeah, and I finally got my bed done, I hung a fender last night to try and figure out what wheels will work.
I'm afraid to just measure for backspacing and width for fear of being off slightly.
For the guys who have done this before, is the best way to do it to just borrow a wheel from a shop and see how it works?
Does anyone lend out stuff like that?
Any suggestions on wheel suppliers that are good to work with?Last edited by tcodi; 08-09-2005 at 05:42 AM.
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
John's ride to the cemetery, his beloved Billings OK bus, The Baby Elephant!! Traveling in style!! As his service was starting I couldn't figure out what the music was, heavy on a flute in a jaunty...
John Norton aka johnboy