Pretty exciting day, eh Donald? Progress is cool!

Now it's time to get familiar with the folks at your local automotive paint jobber. You need to wash that puppy down with wax and grease remover to get the mold release off completely........................every square inch, and nook and cranny. Then some 80 grit to open up that gelcoat and park it in the sun for a couple days so it can off gas. If you use a long board you'll get a hint of how much it's going to take to get the surface smooth enough for a good finish. Of course you can probably see some of it in that shiney surface right now.

That rumble seat/drip rail thing is pretty much like the stock setup. You will want drain holes at the low spots on the corners.