Thread: to much noise from doors
-
01-24-2005 01:53 PM #1
to much noise from doors
Does anyone know how to stop the whistling noise from doors when running above 30 MPH. I replaced all molding and gaskets and have even taken doors off to see if the were aligned right. My 37 sounds good below 30 but after that all I get is wind noise.Keep smiling, it only hurts when you think it does!
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-24-2005 02:09 PM #2
Can you adjust your striker post in some to hold the door tighter ?Objects in the mirror are losing
-
01-24-2005 03:10 PM #3
And if that doesn't work, turn up the radio!Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
01-24-2005 04:20 PM #4
Done all of that . Replaced all gaskets but still getting wind noise from top of doors where they bend to form the curves. These doors are from a donor 37 that I replaced and they fit well. Is it practical to use a thicker gasket along the top and sides of doors or will this cause problems with gapping on the remaining bottom of door?Keep smiling, it only hurts when you think it does!
-
01-25-2005 05:42 AM #5
Thanks Denny I'll give that a try as soon as it warms so I can get my fingers to work.Keep smiling, it only hurts when you think it does!
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance