Welcome to Club Hot Rod!  The premier site for everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more. 

  •  » Members from all over the US and the world!
  •  » Help from all over the world for your questions
  •  » Build logs for you and all members
  •  » Blogs
  •  » Image Gallery
  •  » Many thousands of members and hundreds of thousands of posts! 

YES! I want to register an account for free right now!  p.s.: For registered members this ad will NOT show

 

Thread: to much noise from doors
          
   
   

Reply To Thread
Results 1 to 5 of 5
  1. #1
    chevy 37's Avatar
    chevy 37 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Auburn
    Car Year, Make, Model: 1937 chevy truck& 33 fordtruck
    Posts
    3,017

    to much noise from doors

     



    Does anyone know how to stop the whistling noise from doors when running above 30 MPH. I replaced all molding and gaskets and have even taken doors off to see if the were aligned right. My 37 sounds good below 30 but after that all I get is wind noise.
    Keep smiling, it only hurts when you think it does!

  2. #2
    viking's Avatar
    viking is offline CHR Member Visit my Photo Gallery
    Join Date
    Jun 2003
    Location
    Branson area
    Car Year, Make, Model: 23 T, 53 FLH , 66 C-10 454, 03 CVPI
    Posts
    968

    Can you adjust your striker post in some to hold the door tighter ?
    Objects in the mirror are losing

  3. #3
    Bob Parmenter's Avatar
    Bob Parmenter is offline CHR Member Visit my Photo Gallery
    Join Date
    Apr 2001
    Location
    Salado
    Car Year, Make, Model: 32, 40 Fords,
    Posts
    10,855

    And if that doesn't work, turn up the radio!
    Your Uncle Bob, Senior Geezer Curmudgeon

    It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.

    Luck occurs when preparation and opportunity converge.

  4. #4
    chevy 37's Avatar
    chevy 37 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Auburn
    Car Year, Make, Model: 1937 chevy truck& 33 fordtruck
    Posts
    3,017

    Done all of that . Replaced all gaskets but still getting wind noise from top of doors where they bend to form the curves. These doors are from a donor 37 that I replaced and they fit well. Is it practical to use a thicker gasket along the top and sides of doors or will this cause problems with gapping on the remaining bottom of door?
    Keep smiling, it only hurts when you think it does!

  5. #5
    chevy 37's Avatar
    chevy 37 is offline CHR Member Visit my Photo Gallery
    Join Date
    Jan 2004
    Location
    Auburn
    Car Year, Make, Model: 1937 chevy truck& 33 fordtruck
    Posts
    3,017

    Thanks Denny I'll give that a try as soon as it warms so I can get my fingers to work.
    Keep smiling, it only hurts when you think it does!

Reply To Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Links monetized by VigLink