Thread: rearend gears
Results 1 to 11 of 11
Threaded View
-
01-22-2005 06:50 PM #7
Re: Re: Re: Re: Re: rearend gears
no body cant tell you that. come up with what rpm you wont to turn your motor, with the gear youve got now, put a set of rear tires on that will get you to the rpms you wont in the 1/4 and go try it. thats the only way to know. use theOriginally posted by TedIII
tire are quick time 10.5x28x15" Motor is a 460 with blue thunder heads with chevy exhaust ports. The carb is 1050 Holly ultra, the weight of car minus me is 3100lbs. Engine has 13.1 compression is built to produce 650 horses
Havn't been dyno yet but it will be. Trans is a reverse shifting C-6 work with a 4500 stall, expect to run up around 7000 rpms. Headers havn't been built yet. Car has mustang II front suspension on it.
I had car for a few years and work on it here and there. Took about fifteen off to raise kids, and now I get to go hide in the garage with my 50 cents.
http://home.tampabay.rr.com/1bking/c...calculator.htm
to get the right tires and go see. then youll have something to work with.
Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html





LinkBack URL
About LinkBacks
Reply With Quote
This site is up more often lately, but very little traffic.
Dead!