Search:

I was going to go over the entire roof with 180 or higher grit sand paper and clean with greasewax remover and spray it with more coat of the epoxy sealer/primer(the same stuff). Not really tying to...

I was thinking about giveing it a light sanding and spraying another coat of the epoxy primer. Would this be ok or will it have some sort of bonding issues? After sanding would I have to clean again...

Ya , If "I" sand blasted it it would of really screwed up more. Thanks

Done but not to happy with it. Today has got to be the windiest day of the year....... I sprayed the ground with water and used a tack cloth before I sprayed but still got lint on it with all the...

Thanks Joe. I see what you mean doing the final sand its all came back to a shiny metal.
I got another question though:p I am going to give the final wash down with Nason silicone/wax/grease remover...

I have got the roof almost ready to paint but have a quick question on spraying. In the morning I am going to give it one more wipe down of phosphoric acid and water to neutralize but the instant it...

I wish I had my camera working it looks good. The pits are like micro pits. I dont think there is one I can get a nail in. There tiny. Thanks

I have sanded the entire roof but only taking the rust spots down to bare metal. The naval jelly is working beautifully! Its pulling all the rust up off the metal. I have some pits thought where its...

You guys think naval jelly left over night will ruin something. I dont think i will have enough time to seal it up tonight and yes Pat it is in my back yard,lol:D. Dont want to leave to exposed metal...

It does have 4 ridges that run the length of it. Its not truly flat. Dont mean to be beaten a dead horse . Just want it done right. I never was planning on blasting the entire roof , just the 80% of...

I did not think the small blaster would do a lot of damage:confused::CRY:

ok , got it. I wont blast. I appreciate your help.

I guess I will hit it with a DA and lightly with the media blaster. That might be best?

Talked to the guys at the local paint shop and they said that if I sand blast it just blow it off and cover with Dupont 2505s DTM epoxy primer/sealer and it should be fine. Does this sound right or...

I have a suburban that has had a bad paint job in the past and I need to fix and stop the rust from spreading and prep for paint in the future. So I will have to finish with some type of epoxy...