Search:
Type: Posts; User: MurderBird68
-
04-25-2017 11:42 AM
Thread: Oil pressure woes
by MurderBird68- Replies
- 9
- Views
- 2,019
Im really not sure what the machine shop did. ...
Im really not sure what the machine shop did. This motor has been a mess from the get go. i dropped the block, crank, rods, pistons off to be balanced, pistons pressed on (yeah should have got...
-
04-25-2017 09:01 AM
Thread: Oil pressure woes
by MurderBird68- Replies
- 9
- Views
- 2,019
Test Test test.....LET ME POST! Ok, I dont...
Test Test test.....LET ME POST!
Ok, I dont know wtf is going on, but Ive tried posting 4 times and all I get is "post will not be visible until moderator approval"...
Regardless, i tore it all... -
04-25-2017 06:23 AM
Thread: Oil pressure woes
by MurderBird68- Replies
- 9
- Views
- 2,019
Jerry, I have tried to answer your questions with...
Jerry, I have tried to answer your questions with 2 replies yesterday and all I got was a window saying "post pending moderator approval"
Its all moot point now, #3 cam bearing is wiped out. This... -
04-24-2017 10:28 AM
Thread: Oil pressure woes
by MurderBird68- Replies
- 9
- Views
- 2,019
Im not sure what you mean by this is your...
Im not sure what you mean by this is your problem. The mains are a little loose now IMO and .001 undersized bearings are in the works but this is a race motor. Rods seem spot on for the crank pin...
-
04-24-2017 09:13 AM
Thread: Oil pressure woes
by MurderBird68- Replies
- 9
- Views
- 2,019
Oil pressure woes
First post...try not to beat me up too bad!
355 SBC, fresh build. Only thing NOT new is the block. Block was line bored/honed/cnc squared off the mains and bored .030/decked to 9.000. It an...
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project