Search:
Type: Posts; User: Rdobbs1977
-
10-22-2016 02:26 PM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
Wanted to give DENNYW a Huge shout out and say...
Wanted to give DENNYW a Huge shout out and say Thank You! Denny's advice, thoughts, and provided information served me well in tracking down this problem. I found out it was never the idiot light...
-
10-17-2016 03:56 PM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
Ok really need some help unless i can figure this...
Ok really need some help unless i can figure this out in next hour before i call it a day. It seems i've got bigger problem than idiot light. Came into shop this anoon and had less than 1 volt on...
-
10-17-2016 12:26 PM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
Denny, I got to looking at this again and see...
Denny, I got to looking at this again and see that I did not wire idiot light, like the diagram shows. I wired light to IGN fuse on block terminal. The diagram shows the light wire running direct...
-
10-17-2016 10:10 AM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
Per the diagram, I'll rewire the main battery...
Per the diagram, I'll rewire the main battery wire and run it to the fuse block instead of direct to battery (I'm assuming 'batt' fuse). I'll do the same with the #2 exciter wire and run it to the...
-
10-17-2016 09:51 AM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
FYI, I did not show it but my battery wire is...
FYI, I did not show it but my battery wire is routed to fuse block and from there to 'batt' on turn key. So it looks like my idiot light is correctly wired looking at your diagram. So are you...
-
10-17-2016 06:38 AM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
Here's a pic if you can't open attachment.
Here's a pic if you can't open attachment.
-
10-17-2016 06:31 AM
Thread: Alternator Idiot Light!
by Rdobbs1977- Replies
- 7
- Views
- 1,713
Alternator Idiot Light!
Yesterday, I converted my test motor stand over from a push button/toggle set up to a Turn Key w/fuse box set up. Only reason I did this was to improve upon my knowledge as the old set up was just...
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project