Search:
Type: Posts; User: lrsmith62
-
08-29-2015 05:41 PM
- Replies
- 32
- Views
- 4,931
Ordered a lifter...while I'm waiting for it, I'll...
Ordered a lifter...while I'm waiting for it, I'll get into the oil filter and examine for metal or other crud.
If it's still tapping after new lifter, cam may be messed up.
I'll keep you... -
08-29-2015 04:19 PM
- Replies
- 32
- Views
- 4,931
That's what I'm wondering....if the internals of...
That's what I'm wondering....if the internals of the lifter are damaged. That would account for the rocker not oiling.
Push Rod was turning though, so I'm hoping the lobe is ok. Still going to... -
08-29-2015 03:59 PM
- Replies
- 32
- Views
- 4,931
no...not "hard" to pull out. Was difficult to...
no...not "hard" to pull out. Was difficult to get to. Lifter slide out nice. Literally all the faces, edges and sides of lifter have no markings whatsoever. These are flat tappet hydraulics, so the...
-
08-29-2015 01:27 PM
- Replies
- 32
- Views
- 4,931
wow...I was working on it:) wouldn't come out...
wow...I was working on it:)
wouldn't come out without taking off intake. To the naked eye, the lifter looks ok, no wear marks anywhere on it. Guess it could be failing internally though and not... -
08-29-2015 10:16 AM
- Replies
- 32
- Views
- 4,931
Here is video after valve adjustment....top end...
Here is video after valve adjustment....top end noise lessened but still tapping for sure. Also, engine not running as smooth as it used to....a little sluggish on idle every 30 sec. or so.
... -
08-29-2015 09:54 AM
- Replies
- 32
- Views
- 4,931
gotcha....I'm not running a pcv system, but do...
gotcha....I'm not running a pcv system, but do have the draft tube and the filler cap is vented around the bottom side of it.
-
08-29-2015 09:39 AM
- Replies
- 32
- Views
- 4,931
I don't remember the exact specs/time, but we did...
I don't remember the exact specs/time, but we did do an intentional break in on the engine and I seem to remember running it for 30 min at 2000. The guy that helped me rebuild the engine was an...
-
08-29-2015 09:06 AM
- Replies
- 32
- Views
- 4,931
NTFDAY....as a matter of fact, yes, I'm running...
NTFDAY....as a matter of fact, yes, I'm running original draft tube and filler neck in the Edelbrock intake. Interesting question....why?
On CAM, it's a new cam replaced during the build. Engine... -
08-29-2015 08:35 AM
- Replies
- 32
- Views
- 4,931
Added info....
I did tighten the lifters on the tapping cylinder and was able to quieten it but didn't want to tighten to much and possibly hurt things more. Noticed that one lifter is not oiling very...
-
08-29-2015 08:06 AM
- Replies
- 32
- Views
- 4,931
4 year old rebuild in Corvette - now tapping or knocking...leaking oil
Have a 61 Vette with a newer totally rebuilt 327 block, Edelbrock top end stuff. It seemed to be running high oil pressure for awhile (55-60 cold, 35-50 hot)...higher than it did right after...
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project