Search:

my rearend is in there square... if i take the bolt out will it move on me

i can do that the shocks are off now.. want to put new ones on... how do i now the lenght shock that i need to buy ??????/

ok my shocks are junk ,,, i am thinking someone just threw somting on it and kept all the good stuff ..;;;;how.. do i go about finding out what lenght shocks i need should the ladder bars be level ...

ok i am going to change out my coil overs this winter... then i will do what you said

i can get it scaleld,,, i am going to replace the coil over's and shocks on the rear...i hope it will go away after that and yes it always shoot's to the left ... i will do the whole front end...

the pan hard bar is level,, it runs from the drivers side axle furthest point to the passenger side frame,, so it should be plenty long enough,, thinking it is in the shocks and springs ,,, the front...

ok diangle bar is out and it still does it,,, i am going to put in some new shocks and puting a mini spool this winter,, i hope that will help,,, if not i will rebuild the front end from the steering...

should i take out the diangle bar after i put in the panhard bar or run with both of them ??????????????

bought all my stuff to build my own panhard bar from lane automotive,, i will let you all know if it works... i am thinking i might need some new shocks also , time will tell

thanks for all the help i looked a little closer, the bracket is on the frame and the rear end just need to move a few wire's and my gas line for there tied to the mount on the frame. thats the...

what do you mean the longest panhard bar i can put in ??????????? i can put one the on passenger side on top of the rearend 2nd pic and tie it to the frame on the driver side

yes it is tight,,,,,,,,, that is holding my rearend in the center of the car .. in the second pic you can see amother bracket on the top of the rearend.. i can put a panhard bar from there to the...

there is a braket in the top pic.... you can see it on top of the rearend on the right side

under the camaro

as you can see there is bracket on the rear end just need to put one on the frame

here are some pics

ok guys here is my proplem. i have a 69 camaro norrowed rear end with ladder bars and coil offers.. my problem is it starts to whipp side to side real bad after 1st gear.. i got the rear end in...