Search:

What would be a good cc chamber to run with flat top pistons? The 462 is built with the oval port heads oversized valves 10.5/1 dome speed pro pistons scat i beam rods lunati 590 lift cam and 1.6...

I didnt get to build this motor so im not sure on the cam specs i know it has a pretty choppy idle and when we ran a compression check it only has 165 170 psi cranking compression which would mean...

edelbrock the rpm range is suppose to be 15-65 but its also a dual plane manifold and in 90 percent sure the castings are 840s on the heads but its been a bit since ive looked

my 427 has no low end torque and wont really run untill about 2000rpms. has a 850 demon air gap intake solid non roller cam and factory hi-perf corvette rectangle port heads flat top pistons roller...