Search:
Type: Posts; User: modelb
-
03-31-2011 09:14 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
yes I am using coilovers. I am going to weigh the...
yes I am using coilovers. I am going to weigh the car on each corner with some race car scales a friend has to determine correct springs. As I said before everybodies help is much appreciated. How...
-
03-31-2011 02:44 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
the car is a 1929 model A roadster pick-up with...
the car is a 1929 model A roadster pick-up with no bed. the wheelbase will be around 103". It has an olds quad4 with a c4 and quick change rear-end. It also has a track style nose. it has 4 wheel...
-
03-30-2011 06:01 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
have you ever had it want to bump steer or go...
have you ever had it want to bump steer or go where it wants to during rough roads or chuck holes? How much Travel do you have in the shocks. I have been told to minimize the amount of travel of the...
-
03-29-2011 07:45 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
hey guys check out tri c enginering, they are...
hey guys check out tri c enginering, they are doing the split axle project on one of their cars right now, check it out. just google their name.
-
02-25-2011 03:06 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
Thanks Gentlemen for destroying my "apparently"...
Thanks Gentlemen for destroying my "apparently" dumb and unworkable idea on splitting a tube axle. As someone said, if you do not see it done somewhere it probably did not work. Really guys I...
-
02-24-2011 04:23 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
there is going to be 3" of up travel and 2" of...
there is going to be 3" of up travel and 2" of down travel. This is being determined by the length of travel allowed with my schocks. Do you still think I have a problem? Thank you for...
-
02-23-2011 04:09 PM
Thread: split tube axle
by modelb- Replies
- 30
- Views
- 9,569
split tube axle
I want to take a tube axle and cut it down and pivot it on the front corner of the frame with coil overs and 4/bar and a rack and pinion steering. Think it can work?
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project