Search:
Type: Posts; User: kbyounger
-
05-04-2008 01:08 PM
Thread: center tri carb won't idle...
by kbyounger- Replies
- 6
- Views
- 3,918
Oh well, I used the hard gaskets that came with...
Oh well, I used the hard gaskets that came with the kit, and did not torgue the intake manifold bolts down. I tightened them to what seems to be "tight". Is there any where to locate a larger but...
-
05-01-2008 12:34 PM
Thread: center tri carb won't idle...
by kbyounger- Replies
- 6
- Views
- 3,918
I got the tubes unplugged using carb cleaner and...
I got the tubes unplugged using carb cleaner and a piece of copper wire small enough to up the tubes. Sprayed carb cleaner all around and found no leaks around the carb, but major leaking where the...
-
04-30-2008 05:26 PM
Thread: center tri carb won't idle...
by kbyounger- Replies
- 6
- Views
- 3,918
I don't know all the technical names for these...
I don't know all the technical names for these parts, but stick with me. I took the carb apart, and discovered that the two tubes running down out of the venturi cluster, were clogged. These two...
-
04-30-2008 12:15 PM
Thread: center tri carb won't idle...
by kbyounger- Replies
- 6
- Views
- 3,918
center tri carb won't idle...
I'm putting tri power on a sbc 350 - got the first and third carb openings on the intake sealed off - only the center carb on the car. Just rebuilt the engine and put it together with a mild cam. ...
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project