Search:
Type: Posts; User: 65cayne
-
12-15-2006 08:25 PM
Thread: Valve Spring Rating for Hyd Flat Tappet
by 65cayne- Replies
- 6
- Views
- 2,580
Yes, he said they were too light (i didnt ask him...
Yes, he said they were too light (i didnt ask him what the # was). The one (complete set, inner, outer, damper) I brought in dropped from 145 down to 125# on the seat with an extra .050. Did not...
-
12-15-2006 05:28 PM
Thread: Valve Spring Rating for Hyd Flat Tappet
by 65cayne- Replies
- 6
- Views
- 2,580
I have only removed one spring because the heads...
I have only removed one spring because the heads are on the motor. There was no shims, just the one washer that keeps the spring from eating your heads. So you dont think that they are too...
-
12-15-2006 02:51 PM
Thread: Valve Spring Rating for Hyd Flat Tappet
by 65cayne- Replies
- 6
- Views
- 2,580
Valve Spring Rating for Hyd Flat Tappet
Hey all,
I had one of my valve springs checked at the machine shop and it was 145# @seat and 377# @max lift. My cam card recommends a spring that reads as follows:
120 Lbs Seat Pressure @ 1.820...
here's the latest, I had to cut up the cross section of the frame to get the parallel bars in place and these pic's show my fix . 3 x 6 tube used to rebuild the frame section. [/URL] after lots...
New Project