Search:

some Ford vehicles had an offset engine to the right which also then created even more driveshaft/pinion offset------with lucky choice of the source, sometimes only had to narrow one side of...

Just something thjat I remembered-Heidt's haqs control arms that are 5/8 inch shorter than stock-----would that have solved your ??????

Moving the top bracket inward is going to effect the...

I love all those angle meters and the lazers

Ryan-some of those wheel specs are in MM--------aprox 1/2 inch

Cost of engine ????????An engine rebuild probably costs less than the paint for the hood-----------along those lines of thought----------build a roadster , save some $$$$$on paint since it doesn't...

You are going to raise the upper left bar at the rear so the end is level with housing?????

Other choices ===C4 corvette(92-96), Lincoln, T bird Cougar with IRS, Ford expedition(IIRC) latr Mustang Cobra with IRS,
New Camaro , possibly Viper$$$$$


As the cars became lower ( mid/late...

Some chassis/frames aren't readily compatable with mounting the upper links---might be more related to under floor area of a back seat, but the 2 seater rigs seem to have more room there-


an...

removed coolant crossover where it exits front of heads??????????

those original generators, ac compressors and starters weight a TON---go alum BBC waterpump and alternator with gear reduction starter you will yake 75 lbs off--

The ELEPHANTS were the 426s------------

The valve covers will come off easy if you pull out the spark plug tubes a little---------

starter and oil filter ---remote oil filter helps on the right side---a newer gear driven smaller starter helps on left------

I have a fixture for mocking up a block with a heavy wall tube thru...

Hemi----------------------------------------------------

I use centerline of crankshaft at top edge of frame rails for mounting target-----will have decent ground clearance for oil pans and lower...