Search:

well the stuff i used was ppg DP and you did not want to sand it if you did not have to it was gummy .but i scuff it with a red 3m pad .if your taking primer that made to sand you could hit it with...

you are going over it with a 2 part primer or you want to sand the epoxy sealer? you need to sand both if your time window is gone some time has past it will not link up so you would want to sand it...

now see did i steer you wrong:LOL::LOL: .i had to beat it in your head:LOL::LOL::3dSMILE: just kidding ..now do not get pi$$ at me:3dSMILE:.. yes it looks much better

blue /gold is ok rust no just da if thats the case blow with air wipe with a pre clean till dry with fresh paper towel with a alcohol base pre cleaner and seal down with epoxy

ok then they will be fine just wash and blow them dry

take the pits and scrach them out with a nail or awl what will not come out do not worry about it just make sure the naval jelly is not still live wash good dry it and i would push some mar glass or...

yep and thats flat steel between them . if a hi crown it would take much more . i know what the roof looks like:D i wish i could say i do not... i painted more then one and strip more then one .i did...

well yes and if a pro did it i am sure they would do alot or all of the roof way back with the blaster head low on psi and hi on sand or with ever they hit it with.but he said he was going to fix it...

its dead flat and this has heavy pits by the time its clean it will be warp its going to move .if you grind it and get it hot. it will warp .if you never ever used a blaster on a panle like this you...

NO. i am sorry. i have done body work for over 30 years i have work on them roof s. i would not use any blaster .if by a roof rack or a small spots by the ribs yes but not out in the flat spot of the...

i would use that or vap a rust or jelly or pool acid long with a 3m clean strip wheels long before blasting with sand just a big mess with sand .i like to say i never fixed stuff like this but in...

well like said i have d.a then burbs roof s and they can get loose just from d.a them so wacth it with the blaster you will warp it in a heart beat .

well yes do not just epoxy it and call it good .that is why you have what you have on your truck .i work at shops were we did many of the GM trucks had losse of paint hook up i could dry strip...

you could used pool acid with a 3m red scuff pad use all things needed to work safe with acid rubber gloves face and lungs. wash spot down with alot of water and baking soda wash then with metal prep...