Search:

you many not want to weld that brake part .your going to take out the T6 heat treat up to mount ears . make sure there not 7075T6 they will crack at weld . your far better to copy them in steel then...

yes a big surface backer plate is a must . you have No load on it now add tires engine and van weight will make things move were you think there ok now . if you have to do some fast working on...

for the bearing suport i use D.O.M tube tap it for 3/4 use that for the stalk . if stand off of the frame abit hi i tri angle it with 1/8 but i would be ok for a mount on a race car at 1/8 steel for...

well no but there is gray 2% . gold. blue. and brown .more ?? then the old stand by red 2% and green . i know what some of the colors are but some seam to use different colors for the same...

you can point the tungsten but blunt the tip some if you use ceriated this may help with the focus you weld heat. watch some of them dics cam add to the crap you have to burn clean. me give lessons...

there is some small tricks on welding alum you may know .. mark one is band saw cuts can mess with your weld if the saw was used for cutting steel . the butt end needs to be smooth and clean i use a...

looks good

yep the over all on the alt may push it out that.s ok. as my pulleys can be reworked if need . looks good mark . i have a use for one Thanks :)

please do not go to far out of you way on it. but if it would fit i would have a use for one Thanks

yes i know you need it to work the way you have it but i was looking at the bracket to work closer to the water pump . more close to the top of the head next to the upper part of pump .if you had the...

hey looks good by the way can you flip the alt bracket so it closer to the water pump if so i bet you could sell a bunch of them or at least one :) been some time was thinking at last ride may he...

yep sounds about right mark . showed mark one customers shops and some of his toys .then one of the body shop i worked at on and off from the early 80s till the late 90s next to my customers shop....

hey a chunk of ply wood abit of body filler could tastefully craft up a stem to mount on the roof???

there was a sale on deer green i pickup 3 cans of that just for you ??? . short block will be ready for paint this coming week end

yep i like to know that to :) i here some guys has your engine ... i think i may know him? what color on the block ????

i would never seal a alum tank there is no need . if you seal it you can never weld it . the sealer in steel tanks are a pain in the ass. i have fixed many and put sump s in some as well. you never...

the v has only one seat. caddy may be around

just went down the road with it caddy some work done to it. making 610 hp and 585 tq not to bad had a smile on my face for a hour or so.. the vett is coming in for me work on the rocker arms thats...

yep and i hear you have beer on tap lucky for you i live far away .in my shop no AC old heater fan and the radio .but yesterday. i was thinking of buying one of then 4foot tall fans at tractor supplie

mark if your timming is right there may be some heavy hardware in kawkawlin if you like that ls stuff

i hope your seat brackets are strong... i do not want to hold you up when you hit 2 gear

some guy have it bad AC in the shop ... what the hell ..whats next a TV man nothing going to get done.. i bet you have beer on tap :) you better re work then seats you hit that small block 254 de...

fiber gell works the best on smc fast lay up other then epoxy.poly glass resin just seem s not to work as good as fiber gell..I wish i did not know any of this but i do as in a past life i did...

should not need to hard mount the cable only at mounting points control ends . same control cables what are used in boats there not hard mounted other then at the ends. the GM dog house is SMC...

Fred V is the man.. been doing my 400s and customers trans for 20 years great guy to work with just like most guys from bay city :)