How to attach a baby moon to a wheel that won't accept one.

Quote:

---

Originally Posted by pat mccarthy

yep i drilled and tap the outer steel ring on the rim for button head bolts that way you have the nib to hold them on

---

How did you space the holes and drill them accurately?

This thread is NINE years old, I wouldn't expect an answer anytime soon.

Quote:

---

Originally Posted by NTFDAY

This thread is NINE years old, I wouldn't expect an answer anytime soon.

---

On top of that, patmccarthy last posted in late 2016, 4 & 1/2 years ago and hasn't logged on in almost 3....

If I understand Pat's process, your spacing is 120 degrees and using a protractor will be close enough. The holes are drilled on the outside of the inner ring, I'd say at about a 45 would work, with the button head of the bolt acting like the nib on the old school wheels. If you need a bit more "stand off" put a washer or two on the bolts. If you find it needs to be a bit tighter, drill & tap (or just tap) to the next bigger size.