First off this axle is a tube axle rated at 2,500 lbs. and he said it would be a little under a degree. I did talk to the techs and they were the ones that said the axle and kingpins will work with some machining as in honing the bushings. Then about 10 minutes they called me back and said about the only problem I'm gonna have is the under 1 degree and I can either have the kingpin bosses machined to get the correct degree or have the axle bent. Why did this problem come about? Because I want to use my mid 30's wire wheels on the front. I'm stuck on using em. Now if one of their spindles had the same depth and diameter and would work on this axle,,,,ok. I wonder if I sent them my spindle........just thinking outloud. And I wanted to order what I need before their shipping went up cause now it's only like 7 bucks. HELLLPPPPPPPPPPPPPPP.............