Hybrid View
-
09-10-2006 11:35 AM #1
1940 Chevy Master 8.5 Business Coupe' Rat Rod
Hi, I’m Ole from Germany. I'm a car nut as long as I could remember. I own a few old cars, three are American.
One is a 1940 Chevy Master 8.5 Business Coupe' and that’s why I'm here. Usually I prefer to restore to stock, but the car is not complete and it is difficult to find parts for it over here.
So I choose to make a rat rod. But in Germany it wasn't allowed for a long time to build rods, so we have not much experience.
May be some of you guys can give me an advice.
What I have is a 235 straight6 engine with an 848 head. Guess I would like a “vintage” tuning. Should I swap the front and rear axle? What is the best choice? Is it difficult to chop this car, all is rounded?
Any advice?
Thanks, Ole the Kraut
-
09-11-2006 02:38 PM #2
What a boring forum yaaaawn
-
09-11-2006 08:43 PM #3
Nah, you can chop any car with a Sawzall and a couple of kilos of Play-Doh.....PLANET EARTH, INSANE ASYLUM FOR THE UNIVERSE.
-
09-12-2006 12:15 PM #4
Not to be disrespectful,but I think the "boring" aspect comes directly from this quote"But in Germany it wasn't allowed for a long time to build rods, so we have not much experience." Most peoples first thoughts are ,why? The next thought is the war.the next thought is no reply.A little less kraut and little more hotrod and nobody will think that ,but.....with that phrase in your post,most will be turned off. just my opinion.Its gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
09-13-2006 02:49 PM #5
Originally Posted by shawnlee28
I imagine how the Krauts storm other countries with their hot rods
The German more than thoroughly bureaucracy was the reason, nothing else!
But please accept my apologies for that I called this forum boring, it may be a little slow for a hot rod forum, but it is definitive not boring!
Btw, nice pickup you have! Great work!Last edited by Ole_the_Kraut; 09-13-2006 at 03:04 PM.
-
09-13-2006 03:43 PM #6
Thnx for the compliments on the truck,lots of work!!! I understand about the bureaucracy,things are the same way here! This is my first project ,soo I do not have alot of advice for your car . There are some other members from Germany on this forum,maybe they have some recomendations.They have also posted some nice pitures of shows and events from Germany ,there are some good looking hotrods over there. Good luckIts gunna take longer than u thought and its gunna cost more too(plan ahead!)
-
09-13-2006 04:03 PM #7
I don't know Ole, I've kind of learned that first impressions mean a lot. Can't say I care for your entrance too much.
I've also learned when things start off bad, they generally don't get much better.
I think you are pulling our legs a little. I also wonder if you are really in Germany, or maybe Hoboken?
DonLast edited by Itoldyouso; 09-13-2006 at 04:14 PM.
-
09-14-2006 01:14 AM #8
Don't worry Don, if I go to Hoboken than as a tourist armed with my camera!
I found help on an other board, thanx and I'm sorry again
-
09-14-2006 04:08 AM #9
Anything rounded is a tough chop,,, with not much experience on chopping it may not be something you want to tackle on your own... But if you want to do it, here's some tips.
1. Make a template for every cut you make, that way the cuts remain the same from side to side and fitting is much easier.
2. To fit rounded panels, you will need either some donor panels from a similar car or access to an English wheel to make them. Compound curves and radii are tough to do with a sandbag and plastic mallett... But with a lot of determination and time they can be done.
3. Plan your work on the computer first, either using Photo shop or the like. Or as an alternative make some 8X10 prints (plain paper copies out of your printer work fine) and cut and fit the roof lines back together with a scissors and tape before you do it on the tin with a sawzall and a welder..... Play with some various cuts and combinations to get the desired results.
4. Chopping anything requires that you keep all body pieces in proportion.... When done correctly a chopped car will not look chopped.... When done incorrectly it ends up looking like some Mad Max POS....
5. If you are not a very accomplished metal crafter, enlist the aide of someone who is..... Metal working and pingin' and dingin' a chopped top correctly is not for the faint of heart, inexperienced, or the get it done in a hurry types.
6. Have fun.!!!!!
7. As a final alternative, send me a plane ticket and a bunch of travel and expense money!!!!!!!Yesterday is history, tomorrow is a mystery, Live for Today!
Carroll Shelby
Learning must be difficult for those who already know it all!!!!
-
09-14-2006 05:48 AM #10
welcome ole i spent a little time in Hannove while i was stationed at Gelhousan, germany 1967 to 1969. Gelhousen(sp)i'm sure. didn't see many hot rods then. all VW's. run over a few with my 5T wrecker. don't do chopped tops, so i can't help you there. don't let these guys jump on your bones to bad.Mike
check my home page out!!!
http://hometown.aol.com/kanhandco2/index.html
-
09-14-2006 08:03 AM #11
Originally Posted by Dave Severson
I would love to pay you a plane ticket and have some fun and some beer in my workshop with you. But the problem is like everywhere in the world the same, the money!
Meanwhile I found a great pictured story on the web at streetrodder.com, which explains how to chop a 37'coupe'! Wow, it looks damned difficult Ill better forget that chopping thing....
I guess it is better to choice for a Fulton outside sunvisor or something else that drops the roof optical!
Originally Posted by lt1s10
I grown up in Hameln, there where also stationed some American troops. I remember when I was a boy there was a soldier with a real rot Buick Wildcat. It was rusty and a real tail dragger and the guy hang at the steering, left arm hang out of the window. I assumed if someone opens the door he fall out
I loved it to watch him cruising around. I guess exact this man infected me with the US car virus.
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance