I don't know if I will ever figure out the frame mods!! I have "decided" ten times now how I was lowering, cutting, z-ing this frame, and I always hit a snag. I wanted to z the front and the back, but the frame would be too short, so I decided to just z the back by overlapping the frame, and the crossmembers are in the way to box the inside of the frame. I guess I will have to move the crossmembers before I cut the frames (I am using parts of two frames to get the length I need). It should work out as then I will have a crossmember at each end of the frame pcs. I put together. The only problem is the crossmember in the front will be under the cab so it will have to intrude into the cab, another cab mod! Oh well, I guess once I cut something I have settled on a plan and will go with it. Right now all I do is measure and ponder.
CHAZ