-
04-08-2010 05:31 PM #1
wanted stock Ford flat top pistons
Looking for a good usable set of Ford flat top pistons in standard size . 4 inch bore size for a 1969 302 ci . Looking to get a 9.5-1 CR with some 58cc heads .
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
04-08-2010 05:42 PM #2
The TRW L - 2482 will give you about 9.5 to 1.
But those are heavy pistons you might want to use a differant piston.
And cross check the number with it, a good piston supplier should be able to tell
you what you need to know. If he can't go some where else.
Kurt
-
04-08-2010 06:00 PM #3
Vara thanks but spending out $400 for pistons I am trying to slip by , budget build.
Welcome to Club Hot Rod! The premier site for
everything to do with Hot Rod, Customs, Low Riders, Rat Rods, and more.
- » Members from all over the US and the world!
- » Help from all over the world for your questions
- » Build logs for you and all members
- » Blogs
- » Image Gallery
- » Many thousands of members and hundreds of thousands of posts!
YES! I want to register an account for free right now! p.s.: For registered members this ad will NOT show
The Australians have finally discovered the origin of the word 'Vegan.' Apparently it's an old Aboriginal word for 'Bad Hunter.'
the Official CHR joke page duel