Quote Originally Posted by MRJB1929 View Post
Hi Bart,
I'm in the same situation except I'm fitting seat frames for a 1936 Chevy 2 dr Standard.
I was hoping to salvage the rear seat frame but when removing it the wood just started breaking apart.

In checking out seats there are some out there for our hobby. I suspect you will be more lucky than I in finding seats as there is a lot more available for the Ford than the chevy.

I do have a 34 ford deluxe 4dr and that has seats from Tea's Design in Rochester MN.

Here is a list of some of the places that I've checked out.

Tea's Design http://www.teasdesign.com/
Glide Engineering http://www.glideengineering.com/
Krist Kustoms http://www.kristkustoms.com/
Street Rod Seating http://www.rodseat.com/
Cerullo (I'm impressed with these seats for some reason) http://www.cerullo.com/


Jerome
Thanks for the leads on Krist, StreetRod & Cerullo. I spoke to each and will probably order the frames/foam from Street Rod. Seems like a good guy and has most of the frames I need in stock! Thanks once again! I have a local interior guy who will cover the seats and do the install. I also ordered 3 point belts from wesco performance. They have a nice anchor system for just a couple of bucks! I was starting to worry how to install 3 points before I found that site.