Thread: 46 Ford front spring assy.
-
02-04-2009 08:29 AM #1
46 Ford front spring assy.
I have a 46 Ford front end set up missing the spring and shackles.BUILD'EM, DRIVE'EM, BREAK'EM
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
02-04-2009 02:59 PM #2
Jake: I have a Posies Superslide front spring that came with a bunch of 46 parts I got from Paul in Atlanta. I won't be using that particular spring, and if you want it you can have it free. You've always been someone I like to chat with on here and other forums, and I'd love to give it to you.
Shipping would be a problem as it weighs a bunch and is long, but if you are going to Billetproof in March I can take it with me. Or if you can figure some way to get it to you sooner, just let me know.
Don
-
02-04-2009 04:00 PM #3
Don that means a lot thanks, I will be going to Billetproof, I've got a long way to go before I need it, rust abatement , at least let me buy you lunch or an adult beverage, that's the least I can do. Thanks again!
JayBUILD'EM, DRIVE'EM, BREAK'EM
-
02-04-2009 07:48 PM #4
Cool, I'll take you up on a beer. It's in nice shape, used but it will blast up like new. The slider buttons are a little worn as I remember, but Posies sells them cheap. We will be bringing Dan's daily truck to BP, so we'll toss it in. Be sure to PM me right before BP so I remember............old age you know. The shackles were homemade longer ones, so I tossed those when I took it apart. They are readily available though, I think even Speedway has em.
Ratty 46 treated me very well on the old parts from his 46, and although I am going to use all the other parts for the modified I plan on building, I will be using a different spring, so I am happy it will be going to you. Here is your spring in the middle of this heap.
Don
-
02-05-2009 06:24 AM #5
Terrific! I'll be taking the Chevy II so I'll have plenty of room for it. I paid $200 for the axle set up, it's really in good shape and won't take a lot of work to use. I wrote a note on my calender to remind me to remind you.BUILD'EM, DRIVE'EM, BREAK'EM
Welcome to CHR. I think that you need to hook up your vacuum advance. At part throttle when cruising you have less air and fuel in each cylinder, and the air-fuel mixture is not as densely packed...
MSD 8360 distributor vacuum advance