Thread: Front Subframe
-
01-19-2004 03:42 PM #1
Front Subframe
hey guys before i had my 69 camaro it was hit on the front left side and the frame was bent...and someone tried to fix it so its all welded up and goofy...but it is bent none the less so i was wondering if anyone knows where i can find a new front subframe or a donor...if you could point me in the right direction id appreciate it...thanks
Scott
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
01-19-2004 06:09 PM #2
I'd head down toward the gulf coast where the bodies tend to rust away. Usually the frames hold up better. You may be able to find a 67-69 camaro that someone is parting out or getting rid of due to body rust.
PatOf course, that's just my opinion, I could be wrong!
-
03-28-2004 03:19 PM #3
sub frame
i have a sub frame out of a 1969 firebird.if you are interested.
-
03-30-2004 09:28 AM #4
what all is left on the subframe? and how much would u let it go for? also...where are u located? thanks
scott
-
03-31-2004 03:32 PM #5
1969 firebird everything is still all there i just unbolted from the car and put it a side.all i want is 150.00 in nova scotia.len
-
08-31-2004 05:15 AM #6
I've got a 68' Firebird subframe, I am pretty sure it is the same as yours. It's complete and in good shape. $225.00
-
08-31-2004 07:04 AM #7
sorry wrong post line, i have moved .. jeff cLast edited by vettestr; 08-31-2004 at 07:11 AM.
Jeff C.
Manufacturer of the Cobray-C3
www.cobrasnvettes.com
-
08-31-2004 10:31 AM #8
I replyed to you about the Firebird subframe I have & I guess you replyed back to me.
Problem is I'm new to this site & was unable to read your responce.
You can e-mail me at "bmcgee@clevelandart.org"
-
09-15-2004 07:27 AM #9
SUB FRAME
WHERE ARE YOU LOCATED ?????????
I HAVE A 69 CAMERO SUB, AND I'M IN CALIFORNIA.......
LET ME KNOW.....
MANNY -----
-
09-15-2004 09:02 AM #10
If you are looking for a sub-frame, I've got one.
I'm in Mentor Ohio, east of Cleveland.
Bill
well I decided to do another mod to gain max travel of bars past the intended travel points just for that peace of mind. 1/8 inch is to close so now I'll have 1/2" or better. I cut a 3/16" wall...
New Project