Thread: nova 10 bolt?
-
09-11-2006 03:12 PM #1
nova 10 bolt?
anybody got any nova 10 bolts laying around 62-67?
-
Advertising
- Google Adsense
- REGISTERED USERS DO NOT SEE THIS AD
-
09-11-2006 03:53 PM #2
Thay should be the same width as the Camaro 67- 69 10 bolt"aerodynamics are for people who cant build engines"
Enzo Ferrari
-
09-11-2006 05:16 PM #3
I have a 10 bolt (pos) off my 67 el camino,I think it's the same as nova,
I can measure from axle to axle if you like,
-
09-11-2006 05:32 PM #4
el Camino is coil spring....Novas have leaf springs.
I think an early Nova rear is narrower than a Camaro
-
09-11-2006 07:25 PM #5
yeah the nova is i believe the 8.2 ring gear where as the camaro is 8.5 i think? and yes the nova's are a little narrower then a camaro
-
09-12-2006 05:21 AM #6
I have one--out of a 67 .Its a 3:08- good rear needs brakes and hardware. I,ll take 125 for it.www.adoptafriendforlife.org
-
09-12-2006 03:15 PM #7
scooter, you don't need a new rearend! stay with the one you have.
-
09-14-2006 01:38 AM #8
not for me goofball for a friend. althought i have thought about it. only because tires are such a bi*ch to find for that damn thing! i myself dont think its got enough down low oomph to spin 14.5 hoosiers <it'll look goofier then hell with a 10 slick or 8 inch back there. my friend luke runs 10's on his nova rearend> but no not for me, this time its for a friend!
Finally tracked down my AC leaks, had to buy a sniffer tool to do it. It was one hose fitting that attached to the condenser and one quick connect fitting on my AC manifold hose. The thrill of...
Stude M5 build