Thread: license frame for early plates
Results 1 to 9 of 9
LinkBack URL
About LinkBacksHybrid View
-
06-07-2006 11:49 AM #1
CHR Member
- Join Date
- Sep 2005
- Location
- Granbury
- Car Year, Make, Model: 32 hi boy, 2001 Chev SWB PkUp lowered
- Posts
- 118
new 32 roadster,
If you find out, let me know because my 1932 Texas plates for my roadster are about the same size and hole spacing.
Thanks,
Jim
Less weight more speed; there's no substitute for cubic inches; If it don't go-chrome it
-
06-07-2006 01:38 PM #2
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
There's a guy in the Vancouver, Wa area who mills some from aluminum. He's usually at the swap meets, but they're over until the fall. He has been at the GG deal in Puyallup, but haven't seen him there the last couple years. I'll contact a buddy who lives down there and see if he has a number for the guy.
As for lighting, you'll probably have to use the lighted plate bolts that a company named DEI (Design Engineering Inc.) make. They're called Lite'n Boltz, P/N 030301, available at Summit and many other hot rod part dealers. Or any other kind of light you like.Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
06-07-2006 09:01 PM #3
CHR Member
- Join Date
- Apr 2001
- Location
- Salado
- Car Year, Make, Model: 32, 40 Fords,
- Posts
- 10,898
Here ya go, I guess he's in Portland. Jim Mannthey.....503-669-0943Your Uncle Bob, Senior Geezer Curmudgeon
It's much easier to promise someone a "free" ride on the wagon than to urge them to pull it.
Luck occurs when preparation and opportunity converge.
-
06-09-2006 08:26 AM #4
CHR Member
- Join Date
- Sep 2005
- Location
- Granbury
- Car Year, Make, Model: 32 hi boy, 2001 Chev SWB PkUp lowered
- Posts
- 118
Gives me an Idea!
Uncle Bob,
Thanks for the info. I think I may look around at the parts stores and swap meets and maybe I can find some matching frames and make my own. I have a friend in the welding/fabrication business who is a semi-old school car guy. He has a tig and super good.
Jim
Less weight more speed; there's no substitute for cubic inches; If it don't go-chrome it
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
I know this is a little early but, this site is down more than it's up, so...................... Here's hoping everybody has a great holiday season and my best wishes for a great and prosperous new...
Merry Christmas and Happy New year