Thread: lots of small block chevy parts

Tweet

set of brodix heads for small block chevy, there drilled in both exhaust flanges, have 7/16 rocker studs, not sure but the valves look huge, maybe a 2.08, looks to me like they have been worked over, but i bought them used so i dont know alot about them, they have a fresh mill on the deck by my machine guy, and he checked all the spings and whatnot and said there ready to run... asking 900

http://inlinethumb19.webshots.com/17...600x600Q85.jpg

http://inlinethumb30.webshots.com/45...600x600Q85.jpg

http://inlinethumb32.webshots.com/11...600x600Q85.jpg

http://inlinethumb54.webshots.com/44...600x600Q85.jpg

crane cams, solid roller camshaft, i have the spec card if anyone wants it i can email it, its a 260/270* duration at .050. its .622 lift intake and exhaust. once again, it came from the same engine as the heads and intake. looks in great condition, the pics dont do it justice, its really nice. rpm range on the spec card shows 4200-8000 rpm... asking 250
http://inlinethumb14.webshots.com/47...600x600Q85.jpg

http://inlinethumb35.webshots.com/46...600x600Q85.jpg

http://inlinethumb57.webshots.com/46...600x600Q85.jpg

set of 8 eagle I beam connecting rods, used but in good shape, guy i got them off of told me that they all check out and are ready to go, but i cant gauarantee anything, scr5700BB is etched in each rod.. asking 150
http://inlinethumb21.webshots.com/87...600x600Q85.jpg

http://inlinethumb17.webshots.com/36...600x600Q85.jpg

set of 16 mechanical roller lifters, theres no name on them or anything but he told me their the crane ones, cause he wanted them the same brand as the cam, these are unused, but do not come in original packaging... brand new from summit there like a little over 400... im asking 350
http://inlinethumb61.webshots.com/43...600x600Q85.jpg

http://inlinethumb30.webshots.com/20...600x600Q85.jpg

brand new in the package, harland sharp roller rockers, 3/8 stud and their 1.6 ratio.. brand new from summit there like 229... im asking 200

http://inlinethumb02.webshots.com/22...600x600Q85.jpg
http://inlinethumb64.webshots.com/45...600x600Q85.jpg

russell fuel line kit for a 4150 holley carb, brand new in the box. from summit its like 71.95.. im asking 50 shipped...
http://inlinethumb20.webshots.com/46...600x600Q85.jpg


and i also have a used holley carb, but its a 4011. its an older spread bore, vaccum secondary 650 carb, i think its like one of the q-jet replacement carbs. not in bad shape i guess, no pics but i can take some if someone actually wants it, id take 65 shipped for it


and all prices are shipped, and OBO, interested in anything shoot me a pm and we can figure something out, thanks guys

bump, any one? im open to offers, just need this stuff gone

what's the part number on the fuel line kit from Russell?
Thanks

641180 on the fuel line

Any part number or identification on the heads? Like to know what size the chambers and ports are and what they flow?????