Thread: bbc canfield heads

Tweet

one set of canfienld heads rect port 310 cc runner no porting never been decked . they have less then 100 miles on them they have a new set of ss pbm competition race valves that come with them 11/32 stems 2.250 intake and 1.880 ex the heads have had a 4 angle valve job on intake and full radius with a 45 on ex and back angle for max flow with 3D cutters and hand lap in all valves in at no more then +003 or -003 all cleaned and every thing check ready for springs . heads will come with new valves new seals . not new are heads guide plates 3/8 and rocker studs . $1300 will take them i can set up the heads with cups springs retainers and locks for any cam for abit more i have a set of like new 1.7scorpion roller rockers to if needed can build as a package deal

I put my pickup on Craigslist, maybe it will sell quick and I can scoop up these heads for my BBC--or are they too much for the street, Pat????

Originally Posted by Dave Severson

I put my pickup on Craigslist, maybe it will sell quick and I can scoop up these heads for my BBC--or are they too much for the street, Pat????

them heads will work good for street or track would work good on a 468 496 i can set the heads up for any cam and they say 800 hp on canfields sight with a 468 bbc

Originally Posted by pat mccarthy

them heads will work good for street or track would work good on a 468 496 i can set the heads up for any cam and they say 800 hp on canfields sight with a 468 bbc

Well, sure am hoping that my pick-em-up sells quick!!!! Should make for a rompin' stompin' BB in a 2600 pound 'maro!!!!!!--- Then I can sell that and put them $$$$$ into the Ranchero, too!!!!!!

they have cnc chambers and flow intake 353 cfm @700 lift and ex 273 @ 700 lift.i have some very nice used stuff cams 680to 700 268 @ 050 on 110 or 108 comp roller cam .pro crane lifters with hippo and Psi springs along with a 454 block with usa made billet main caps make a hell of a runner

I would like to buy the whole set up. I am trying to build a 496 and i have the block and rotating assembly ready. I am putting it into a 75 camaro. My buddy bought ProComp heads and is running a roller cam and ran 11.3 with 150shot. I am also goint to run a 150 shot and I want a better head and cam intake set up and I think I could get into 10s with 496. what do you think?