Thread: 350 gm roller engine

Tweet

here is a Gm350 two bolt main Marine block HYD ROLLER BLOCK short block that was going to be used in my truck . i would like to sell it as a short block. here is the info on the short block.hot tank and magnafluxed no sleeves or any damage block bore is fresh .030and hone with deck plates and plateau honed .block is deck with BHJ tru deck and brass frost plugs the pistons are new hyper speed pro piston dish 423ncp.030 .070 dish 64cc/8.5 cr with moly hasting rings the rods are gm X rods recond with ARP rod bolts rods are weight match and pistons. crank is stock GM cast STD rods and STD mains Mich 77 rods and mains.cam bearings ch8 dura-bond .block will be sold as short block. all parts are new but block crank and rods all parts not new are recond to very close tolerance . evey thing check and held to 0002.this is a pro built short block .a great engine for hot rod. driver .or mild racing $800. for short block.i will put on a palette .i will help with getting it on the shipping truck .you will need to pay for shipper PM me with any question engine can be long block

Pat, I'm going to list this on another forum also, if you don't mind. Super deal and I know you do stuff right.

Don

Originally Posted by Itoldyouso

Pat, I'm going to list this on another forum also, if you don't mind. Super deal and I know you do stuff right.

Don

thanks don it a very nice short block

Knowing you the way I do, I'm sure of it. I got it posted and told them to come here to get in touch with you if they are interested.

Wish you were closer, I would snap that up in a heartbeat.

Don

Originally Posted by DennyW

Pat, A picture would help also to show it.

ok try to get one on here all parts are ready to get short block just needs a good wash. so if any one want a photo of it should be short block by the end of the week