Threaded View
-
11-26-2007 10:06 AM #1
Heads And Cam Combo 280h Comp Cam Sbc-041 and others
I have a set of 65cc iron heads (bought from Indy cylinder head)with screw in studs and guide plates for sale, they have also been gasket matched for a felpro 1205 intake gasket. They will need resurface but should be fine at 64cc. I also have a set of 58cc 041 iron heads that have been ported and polished and gasket matched to the felpro 1205 intake gasket. Both sets have screw in studs and guide plates. I will sell the heads assembled and ready for bolt on. All parts are new except for valves. Springs are new ,retainers,locks, arp studs guide plates. Heads have been set up and ran with a 280h comp cam package/kit. The assembly only seen about 1000 miles ,if that. I also ran at the track 1 time. If needed I can show pics of the wear pattern on the vavle stem tip, almost cant be seen. I also have a set of Crane roller rockers that were used with this set up, 1.5 ratio. I can sell either heads with the 280H combo ,everything includeing timing chain to the roller rockers. All you will need is lifters and push rods.
I have new springs and retainers also that came with the Indy heads that can be installed on either of the heads I will get specs on those and pics.Last edited by BigTruckDriver; 11-30-2007 at 01:33 PM.
Friends dont let friends drive fords!
A burglar broke into a house one night. He shined his flashlight around, looking for valuables when a voice in the dark said, 'Jesus knows you're here.' He nearly jumped out of his skin, clicked...
the Official CHR joke page duel