sounds like most small compressors, your gun consumes more CFM's then the compressor can handle. just crank the up the air regulator to 150 PSI at your wall guage , then regulate the incomming air to the gun with that regulator. It will suck down the air in the compressor , but it should spary it out the gun .

I know money is tight with everyone , but it might pay to purchace a LVLP ( Low volume low pressure )Paint gun. they require around 3-8 CFM's with only 10-30 psi at the gun as my Iwatta does. Sata also has a LVLP gun , but costs more.


Painting is like Ballet, got to flow and be one with your gun , young grasshopper

Spray