Thread: Opinions on Type/ Brand of paint for your Chassis

Tweet

Originally Posted by KOULAIDE

What abput the springs and the rest of the suspension?

I should add I did the differential and leaf springs too. The paint is almost water thin(thus as mentioned wear clothing you don't care about for it drips off the brush easily) but goes on and self levels, thus no brush marks as stated above. If you prep it with the marine clean(in kit) it will bond very well, especially to rusted surfaces. I recently had to grind two spots on the frame for ground wires, and was amazed at how tough the stuff was to get off. Started with sand paper, ended with electric grinder!
I also went out and looked at the can it's a quart, not pint sorry for misinfo, but point is it goes a long way!