Thread: Finish sanding

Tweet

Originally Posted by roadster32

Do you guys over there not tint your primers body colour ???

yep i said i tinted the last to coats of primer .i did this some times used the ppg k36 i would use it as a sanding tint sealer but alot of times i just did not tint the primer if a good cover color .in the shop i work at i was painting evey day so you knew real fast what paint would not cover and there s a deal with the more solvent you hit the car body or that your painting with the move solvents are going to dive in and move stuff this is were getting all the body work done before you prime . with out all that poly putty sitting on the primer then moving around when your solvents dive in
if i walk round the car more then 4 times with a soild paint or clear then i would cut it flat and put more color on or clear this help s to so your not piling all the thinners on at the same time and when you cut the paint that helps let them get out as well but this was some time ago i know with the V.O.C theres less thinners .but you still have to watch them. that is were how fine you sand up to comes in to play as well. hirer the paint is cut with thinner or slower it drys . the finer you would go up with the paper