I will have to check that little gun out! I am working at Wachovia Securities temporarily but starting my own automotive mobile detailing business. It's a bit more relaxing for me and not as much overhead as it would be to start a shop. I still do paint on the side though and doing a bike now but having MAJOR problems with the junk Nason black base drying and making the clear solvent popping. I have redone it 4 times. At first I thought it was specs in it from bad activator so reshot it the 3rd time with all new clear and activator and now found out that the cheap Nason black base takes almost a full day in the sun to cure underneath and breath out. I threw it out and am painting it right now (waiting for the 2nd coat to dry) and using PPG Omni (which is still cheap but I've never had problems with it). The guy wants it black for now but I am repainting the bike when he gets more money in a metallic orange and some graphics and lettering on the tank...
I am going to let this PPG base dry for about 4 hours or more before laying my SPI Universal Clear.