Thread: 5star Xtreme Primer

Tweet

Thanks Dave,

I phoned the POR15 rep and he said there should be no problem spraying it over the POR15 Tie-Coat primer and the rep from Lizard skin said it will be a good base to apply the coatings to. So that made me happy.

I went out with the intention of doing the underside and body panels where I am putting the Lizard Skin and I ended up doing the whole interior except the roof. I found a 38"x68" sliding rag-top for that .

It sprayed real easy and came out nice and smooth using a 1.8 tip and 30 psi at the gun (HVLP). A lot easier than the urathane I used on my frame. I mixed it 4:1:2 as per the directions for primer sealer so am I correct in thinking this is ready for topcoat now. I've only done the underside and interior so I don't need a high fill.

Sean