Thread: Best way to strip car's underside?

Tweet

Originally Posted by Itoldyouso

I've never personally used it, but have heard easy off oven cleaner works well on the grease and tar under there. Might want to try a small area?


Don

If you can get the metal warm enough it works fairly good..... Spray it on, give it 2 or 3 hours to soak and get out the putty knife!!!! A note of caution, make sure you wear the long rubber gloves when scraping this stuff, it burns the hands and arms!!!!! When you get the scraping part done, rinse everything with a pressure washer, then air pressure to get the water off and go after whatever is left with your trusty putty kinife and a wire wheel. Get some primer or POR 15 on it soon, bare metal will start forming rust very quickly!!!!